How to properly use and maintain the Hydraulic platform truck to ensure efficient and safe aerial work?

What is the main purpose of this Hydraulic platform truck?

This Hydraulic platform truck, also known as Floor lift equipment, is mainly used to provide a liftable working platform for working at different heights. It is particularly suitable for scenes where maintenance, repair or installation work needs to be carried out at a certain height, such as warehouses, factories, construction sites, etc. By repeatedly stepping on the foot lever, the working surface can be raised, allowing the operator to easily reach the required height without the need to use a ladder or other makeshift platform, thereby improving work efficiency and safety. The design of the Hydraulic platform truck enables it to play an important role in various industrial environments, ensuring the safety and convenience of operators when working at height.

What matters need to be paid attention to in the maintenance and care of this Hydraulic platform truck?

1. Check the hydraulic system regularly: ensure that the hydraulic oil is clean and sufficient to avoid leakage or blockage in the hydraulic system. Regularly replace the hydraulic oil and filter element to keep the hydraulic system running efficiently.

2. Check the pedal and knob: Ensure the flexibility and reliability of the pedal and knob to avoid inconvenience in operation due to jamming or damage. Lubricate the moving parts of the pedal and knob regularly to keep them operating smoothly.

3. Check the brake system: Check the effectiveness of the brake system regularly to ensure that the brakes can be opened smoothly before moving the equipment to prevent the equipment from sliding during operation. Check the wear of the brake pads and replace them if necessary.

4. Check the wheels and bearings: Ensure the lubrication and integrity of the wheels and bearings to avoid poor movement due to wear or jamming. Check the fixing bolts of the wheels regularly to ensure that they are tightened reliably.

5. Cleaning and anti-corrosion: Clean the surface of the Hydraulic platform truck regularly to prevent dust and dirt from accumulating, and treat the metal parts with anti-corrosion to prevent rust. Use appropriate cleaners and anti-corrosion agents to protect the appearance and performance of the equipment.

6. Check the working surface and supporting structure: Ensure the stability of the working surface and supporting structure to avoid safety hazards caused by deformation or damage. Regularly check the flatness of the working surface and the connection parts of the supporting structure to ensure that they are safe and reliable.

How to raise the working surface of the Hydraulic platform truck?

1. Make sure the equipment is stable: Place the Hydraulic platform truck on a hard, flat surface and make sure the brakes are on to prevent the equipment from sliding during operation. Check the stability of the equipment to ensure that it does not tilt or slide during the lifting process.

2. Step on the pedal: Repeatedly step on the pedal with your foot to gradually raise the working surface through the hydraulic system. Each time you step on the pedal, hydraulic oil will be pressed into the hydraulic cylinder to push the working surface up. Pay attention to the strength and frequency of stepping to ensure that the working surface rises smoothly.

3. Adjust to the required height: According to the needs of the operation, adjust the working surface to the required height by repeatedly stepping on the pedal. When the required height is reached, stop stepping on the pedal and the working surface will remain in the current position. Ensure that the working surface is stable at the required height and the operator can safely perform aerial operations.